Paradyne 4200 Rtrv-Atmarpent, 8-17, 13. RTRV-ATMARPENT Command Parameters, Response Format, IP c

8. IP Access Commands

RTRV-ATMARPENT

The command RTRV-ATMARPENT retrieves entries in the ATM Address

Resolution Protocol table.

Table 8-13. RTRV-ATMARPENT Command Parameters

RTRV-ATMARPENT:[tid]:aid_ipport:[ctag]::[ip_addr];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
aid_ipport	Access identifier of the IP port. The value can be preceded with AID=,
	but this is not required. The valid values are:
	ATM-1: First IP-over-ATM interface in the NT
	ATM-2: Second IP-over-ATM interface in the NT
	Grouping is allowed and ALL may be used.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
ip_addr	The next-hop IP address associated with the port. Valid values are:
	ddd.ddd.ddd.ddd (where ddd is 1− 255).

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* RTRV-ATMARPENT:[tid]:aid_ipport:[ctag]::[ip_addr] */ aid_ipport:ip_addr,vpi,vci,arpent_nblk

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY;

/* RTRV-ATMARPENT:[tid]:aid_ipport:[ctag]::ip_addr */ errcde

/* error description */

;

4200-A2-GB20-00 August 2002 8-17