Paradyne 4200 manual Canc-User, 14-6, 5. CANC-USER Command Parameters, CANC-USERtiduidctag, IP c

14. System Commands

CANC-USER

The CANC-USER command logs off a user’s own session.

Table 14-5. CANC-USER Command Parameters

CANC-USER:[tid]:[uid]:[ctag];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	The identification of the target NE. TID is optional and has a factory
	default value of null. The NE's SID code is the only other valid value.
[uid]	The user identification name (10 characters maximum). Input is
	case-sensitive.
[ctag]	The correlation tag (6 characters maximum) that links an input
	command with associated output responses. It is optional with a default
	of 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* CANC-USER:[tid]:[uid]:[ctag] */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* CANC-USER:[tid]:[uid]:[ctag] */ errcde

;

14-6 August 2002 4200-A2-GB20-00