Paradyne 4200 Rtrv-Meta-Cmd, 14-21, 19. RTRV-META-CMD Command Parameters, RTRV-META-CMDtidcmdctag

14. System Commands

RTRV-META-CMD

The RTRV-META-CMD command retrieves a specific or a list of all TL1 commands.

Table 14-19. RTRV-META-CMD Command Parameters

RTRV-META-CMD:[tid]:[cmd]:[ctag][:];

RESTRICTION: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
cmd	The command value. Valid values are:
	– NULL: Retrieve all commands
	– command name: Retrieve that specific command.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss M c COMPLD

/* RTRV-META-CMD:[tid]:[cmd]:[ctag]; */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-META-CMD:[tid]:[cmd]:[ctag]; */ aid:ERRCDE=errcde

/* error description */

;

4200-A2-GB20-00 August 2002 14-21