Paradyne 4200 Rtrv-Profile-Trafdsc, 5-19, 15. RTRV-PROFILE-TRAFSDSC Command Parameters, IP c

5. ATM Commands

RTRV-PROFILE-TRAFDSC

The RTRV-PROFILE-TRAFDSC command retrieves configuration parameters of an ATM traffic descriptor file.

Table 5-15. RTRV-PROFILE-TRAFSDSC Command Parameters

RTRV-PROFILE-TRAFDSC:[tid]:trafdsc_profile_id:[ctag]::,[pro file_scope];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
trafdsc_profile_id	Numeric Identifier for a traffic descriptor profile (1− 250). Grouping and
	ranging are allowed and ALL may be used.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
[profile_scope]	Scope of the profile. The valid value is LOCAL (local to this unit only).
	If no value is specified, this parameter is ignored (all values are
	specified).

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD /*

RTRV-PROFILE-TRAFDSC:[tid]:trafdsc:[ctag]::,[profile_scope] */ trafdsc:profile_name:profile_scope:trafdscr_type:trafdscr_ nblk

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-PROFILE-TRAFDSC:[tid]:trafdsc:[ctag]::,[profile_scope] */

errcde

;

4200-A2-GB20-00 August 2002 5-19