Paradyne 4200 manual ATM Interface Traffic Descriptor Group RFC

C. Traps and MIBs

Table C-6. ATM Interface Configuration MIB Group Objects (2 of 2)

Object	Description	Setting/Contents
atmInterfaceMyNeighborIfName	The value of this object contains	Read-only. Valid values are:
(atmInterfaceConf Entry 12)	textual name of the the interface on	ATM1− 24 interface: Corresponding the
	the neighbor system connected to
		value of atmfPortMyIfName through ILMI
	the far end of this interface.
		interaction with the neighbor system.
		ATM90 interface: zero-length string
		ATM91 interface: zero-length string
atmInterfaceCurrentMaxVpiBits	The maximum number of VPI bits	Valid values are:
(atmInterfaceConf Entry 13)	that can currenly be used at this	ATM1− 24 interface: 4
	ATM interface.
		ATM90 interface: 5
		ATM91 interface: 0
atmInterfaceCurrentMaxVciBits	The maximum number of VCI bits	Valid values are:
(atmInterfaceConf Entry 14)	that can currenly be used at this	ATM1− 24 interface: Actual (default is 8)
	ATM interface.
		TATM90 interface: 6
		ATM91 interface: 8
atmInterfaceSubscrAddress	The identifier assigned by a service	The only valid value is zero.
(atmInterfaceConf Entry 15)	provider to the network side of the
	public UNI.

ATM Interface Traffic Descriptor Group (RFC 2515)

The ATM virtual link tables use this ATM Traffic Descriptor table to assign traffic parameters and service category to the receive and trnsmit directions of the ATM virtual links (VPLs and VCLs). The only object is atmServiceCategory (atmTrafficDescrParamEntry 10). The only valid values for this object are cbr(2) (Constant Bit Rate), rtVbr(3) (Real-Time Variable Bit Rate), nrtVbr(4) (NonReal-Time Variable Bit Rate), and ubr(6) (Unspecified Bit Rate).

4200-A2-GB20-00 August 2002 C-15