Paradyne 4200 manual Traps and MIBs

C. Traps and MIBs

Table C-17. Paradyne Syslog MIB Objects (2 of 2)

Object	Description	Setting/Contents
pdnSyslogSeverityThreshold	Specifies the minimum severity level that	Valid values are:
	syslog messages can be sent.	emergency(0): System is
		unusable
		alert(1): Action must be taken
		immediately
		critical(2): Critical conditions
		error(3): Error conditions
		warning(4): Warning conditions
		notice(5): Normal, but significant
		condition
		info(6): Informational messages
		debug(7): Debug-level
		messages
pdnSyslogRemoteDaemon	Enables or disables syslog messages going	Valid values are:
	to a remote daemon.	TDisable(1)
		Enable(2)
pdnSyslogNumber	A sequentially increasing index of syslog	Integer.
	messages starting at 1. The index is reset to
	1upon device reset or when the table is
	cleared (using pdnSyslogClearTable).
pdnSyslogMessage	The text of the syslog message.	Octet string.
pdnSyslogNumOfMsgInTable	Specifies the number of syslog messages	Integer.
	currently in the syslog table.
pdnSyslogMaxTableSize	The maximum number of syslog messages	Integer.
	the syslog table can hold.
pdnSyslogClearTable	Clears all the entries in the syslog message	Valid values are:
	table.	noOp(1)
		clear(2)
pdnSyslogMsgToConsole	Allows messages to be sent to the device’s	Valid values are:
	console port. For debugging only.	Disable(1)
		Enable(2)
pdnSyslogRateLimiting	Enables or disables rate limit timing.	Valid values are:
		TDisable(1)
		Enable(2)

C-40 August 2002 4200-A2-GB20-00