Paradyne 4200 manual Ed-Profile-Adslupalm, 3-21, 17. ED-PROFILE-ADSLUPALM Command Parameters 1 of

3. ADSL Facility Commands

ED-PROFILE-ADSLUPALM

The ED-PROFILE-ADSLUPALM command enables you to edit ADSL alarm line configuration parameters for the upstream direction (from ATU-R to ATU-C) in an ADSL Alarm Profile. See ENT-PROFILE-ADSLALMon page 3-26for information on how to create a new ADSL alarm profile.

Table 3-17. ED-PROFILE-ADSLUPALM Command Parameters (1 of 2)

ED-PROFILE-ADSLUPALM:[tid]:adsl_profile_id:[ctag]:::[adslpr of_nblk];

RESTRICTIONS: All parameters in this command are position-defined. After a profile is activated, its parameters cannot be edited.

[tid]	Identification of the target NE. TID is optional and has a default value of
	null. The NE's SID code is the only other valid value.
adsl_profile_id	Numeric identifier of a profile (1− 30).
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
[adslprof_nblk]	ADSL parameter block containing one or more of the following named
	parameters (separated by commas):
	LOFS-L: Loss Of Frame Seconds (line). SNMP trap and TL1
	autonomous message are sent if the number of LOFS events in a
	15-minute interval meets or exceeds the selected value (0− 900
	seconds, where 0 disables the messages). The default is 0.
	LOSS-L: Loss Of Signal Seconds (line). SNMP trap and TL1
	autonomous message are sent if the number of LOSS events in a
	15-minute interval meets or exceeds the selected value (0− 900
	seconds, where 0 disables the messages). The default is 0.
	LOLS-L: Loss Of Link Seconds (line). SNMP trap and TL1 autonomous
	message are sent if the number of LOLS events in a 15-minute interval
	meets or exceeds the selected value (0− 900 seconds, where 0 disables
	the messages). The default is 0.
	ES-L: Errored Seconds (line). SNMP trap and TL1 autonomous
	message are sent if the number of ES events in a 15-minute interval
	meets or exceeds the selected value (0− 900 seconds, where 0 disables
	the messages). The default is 0.
	SES-L: Severely Errored Seconds (line). SNMP trap and TL1
	autonomous message are sent if the number of SES events in a
	15-minute interval meets or exceeds the selected value (0− 900
	seconds, where 0 disables the messages). The default is 0.
	UAS-L: Unavailable Seconds (line). SNMP trap and TL1 autonomous
	message are sent if the number of UAS events in a 15-minute interval
	meets or exceeds the selected value (0− 900 seconds, where 0 disables
	the messages). The default is 0.
	INCRATE-F: Increasing Rate (fast channel). SNMP rate change trap
	and TL1 autonomous message are sent if the current rate is ≥ the
	previous rate plus this threshold (0-2176 kbps in 32 kbps increments,
	where 0 disables the messages). The default is 0.

4200-A2-GB20-00 August 2002 3-21