Paradyne 4200 Rls-Lpbk-Vcl, 15-9, 7. RLS-LPBK-VCL Command Parameters, RLS-LPBK-VCLtidaidvclctag

15. Test Commands

RLS-LPBK-VCL

The RLS-LPBK-VCL command releases any loopback currently active on the selected ATM VCL.

Table 15-7. RLS-LPBK-VCL Command Parameters

RLS-LPBK-VCL:[tid]:aid_vcl:[ctag][:];

RESTRICTION: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
aid_vcl	Access identifier for the ATM virtual channel. The value can be
	preceded with AID=, but this is not required. Grouping and ranging are
	allowed. Enter in the following format, replacing lower-case parameters
	with the values given:
	NTVCL-rack-shelf-slot-circuit-vpi-vci: VCL for NT circuit
	LTVCL-rack-shelf-slot-circuit-vpi-vci: VCL for LT circuit
	– rack: rack number (1)
	– shelf: shelf number (1)
	– slot: LT slot number (1)
	– circuit: ADSL circuit on the NT/circuit on the LT (1)
	– vpi: Virtual Path Identifier
	– vci: Virtual Channel Identifier
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* RLS-LPBK-VCL:[tid]:aid_vcl:[ctag][:] */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RLS-LPBK-VCL:[tid]:aid_vcl:[ctag][:] */ aid:ERRCDE=errcde

/* error description */

;

4200-A2-GB20-00 August 2002 15-9