Paradyne 4200 3-41, 32. RTRV-PROFILE-ADSL Response Parameters, ENT-PROFILE-ADSL on page, Example

3. ADSL Facility Commands

Table 3-32. RTRV-PROFILE-ADSL Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
adsl_profile_id	As described for command parameters, except that ALL is not used
profile_name	Name (32 characters maximum) that uniquely identifies the profile
	within its scope
profile_scope	As described for command parameters
latency	Latency of the ADSL line. Only single latency is supported upstream
	and downstream. The valid value is FAST (only ADSL FAST supported).
profile_state	State of the profile (ADSL profiles only). Values are:
	CONFIG: Profile is currently being created. It can be configured, but not
	used.
	ACTIVE: Profile has been activated and is ready for use and is
	configured.
errcde	Error code (see Appendix A, Error Codes)

Example

Retrieve profile 5.

RTRV-PROFILE-ADSL:TAMPA:5:42;

TAMPA 02-07-24 12:30:43

M42 COMPLD

/* RTRV-PROFILE-ADSL:TAMPA:5:42 */ 5:LOCAL:TAMPA101:CONFIG

;

Related Commands

ACT-PROFILE-ADSLon page 3-2

DLT-PROFILE-ADSLon page 3-6

ENT-PROFILE-ADSLon page 3-24

4200-A2-GB20-00 August 2002 3-41