Paradyne 4200 manual REPT-OPSTAT-ADSLDN Response Parameters Explanation

9. Performance Commands

Table 9-4. REPT-OPSTAT-ADSLDN Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_adsl	As described for command parameters (see Table 9-3,
	REPT-OPSTAT-ADSLDN Command Parameters).
op_adsl	ADSL operational parameter. Values are:
	ATEN: Signal attenuation (0 − 60 dB)
	CELLSF: Rolling count of cells transmitted downstream on Fast channel
	CURFBR: Current Fast channel bit rate (32 − 2176 QOSCLASSF:
	Quality of Service for the ADSL Fast channel. The supported option is
	UBR (Unspecified bit rate). UBR is the default.
	NMR: Noise margin (0 − 31 dB)
	PWR: Transmitted signal power n (0− 20 dB)
	RELCAP: Relative capacity operation. Configured bit rate as a
	percentage of the current bit rate (0 − 100)
value	Value of parameter specified by op_adsl

Example

Report downstream operations parameters for ADSL-1-1-1-3.

REPT-OPSTAT-ADSLDN:TAMPA:ADSL-1-1-1-3:42;

TAMPA 01-10-24 12:30:43

M42 COMPLD

/* REPT-OPSTAT-ADSLDN:TAMPA:ADSL-1-1-1-3:42 */ "ADSL-1-1-1-3:RELCAP,70"

"ADSL-1-1-1-3:NMR,3"

"ADSL-1-1-1-3:PWR,8" "ADSL-1-1-1-3:ATEN,4" "ADSL-1-1-1-3:CELLSF,1000"

;

Related Commands

REPT-OPSTAT-ADSLUPon page 9-7

9-6 August 2002 4200-A2-GB20-00