Paradyne 4200 Ed-Profile-Adslup, 3-19, 15. ED-PROFILE-ADSLUP Command Parameters, Response Format

3. ADSL Facility Commands

ED-PROFILE-ADSLUP

The ED-PROFILE-ADSLUP command enables you to edit ADSL line configuration parameters for the upstream direction (from ATU-R to ATU-C) in an ADSL Profile. See ENT-PROFILE-ADSLon page 3-24for information on how to create a new ADSL profile.

Table 3-15. ED-PROFILE-ADSLUP Command Parameters

ED-PROFILE-ADSLUP:[tid]:adsl_profile_id:[ctag]:::[adslprof_ nblk];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. TID is optional and has an default value
	of null. The NE's SID code is the only other valid value.
adsl_profile_id	Numeric identifier of a profile (1− 30).
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
[adslprof_nblk]	ADSL parameter block containing one or more of the following named
	parameters (separated by commas):
	PFBR: Planned Fast Channel Bit Rate in kbps (32− 2176).
	MAXFBR: Maximum fast-channel bit rate in kilobits per second
	(32− 2176). The default is 2176. Range and default vary per model.
	MINFBR: Minimum fast-channel bit rate in kilobits per second (32). The
	default is 32. Range and default vary per model.
	TNMR: Target noise margin (3− 14 dB). Default is 4 dB.
	If not specified, the values of these parameters remain unchanged.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD /*

ED-PROFILE-ADSLUP:[tid]:adsl_profile_id:[ctag]:::[adslprof_n blk] */

;

4200-A2-GB20-00 August 2002 3-19