Paradyne 4200 Rtrv-Atur, 3-35, 27. RTRV-ATUR Command Parameters, RTRV-ATURtidaidaturctag, IP c

3. ADSL Facility Commands

RTRV-ATUR

The RTRV-ATUR command retrieves operational parameters configured for the

ADSL ATU-R.

Table 3-27. RTRV-ATUR Command Parameters

RTRV-ATUR:[tid]:aid_atur:[ctag];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
aid_atur	Access identifier for an ADSL line. The value can be preceded with
	AID=, but this is not required. Grouping and ranging are allowed. Enter
	in the following format, replacing lower-case parameters with the values
	given:
	ATUR-rack-shelf-slot-circuit
	rack: Rack number (1)
	shelf: Shelf number (1)
	slot: LT slot number (1)
	circuit: ADSL circuit on the LT (1− 24)
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* RTRV-ATUR:[tid]:aid_atur:[ctag] */

aid_atur:atur_nblk

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-ATUR:[tid]:aid_atur:[ctag] */ errcde

;

4200-A2-GB20-00 August 2002 3-35