Paradyne 4200 10-23, RTRV-ATTR-EQPTtidaidalleqptctagntfncde, condeqpt, Response Format, IP c

10. Fault Commands

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss M c COMPLD

/* RTRV-ATTR-EQPT:[tid]:aidall_eqpt:[ctag]::[ntfncde], [cond_eqpt] */

"equip_type,aid_type:ntfncde,cond_eqpt"

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-ATTR-EQPT:[tid]:aidall_eqpt:[ctag]::[ntfncde], [cond_eqpt] */

errcde

;

Table 10-14. RTRV-ATTR-EQPT Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
equip_type	As described for command parameters (see Table 10-13,
	RTRV-ATTR-EQPT Command Parameters).
aid_type	The type of Access Identifier. The value is EQPT.
ntfncde	As described for command parameters (see Table 10-13,
	RTRV-ATTR-EQPT Command Parameters), except that ALL is not
	used.
cond_eqpt	As described for command parameters (see Table 10-13,
	RTRV-ATTR-EQPT Command Parameters).

4200-A2-GB20-00 August 2002 10-23