Paradyne 4200 manual RTRV-PROFILE-ADSLUP Response Parameters Explanation

3. ADSL Facility Commands

Table 3-40. RTRV-PROFILE-ADSLUP Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
adsl_profile_id	As described for command parameters (see Table 3-39,
	RTRV-PROFILE-ADSLUP Command Parameters), except that ALL is
	not used.
profile_scope	As described for command parameters (see Table 3-39,
	RTRV-PROFILE-ADSLUP Command Parameters).
profile_name	A string of up to 32 characters that uniquely identifies the profile within
	its scope.
[adslprof_nblk]	ADSL parameter block containing one or more of the following named
	parameters (separated by commas):
	MAXFBR: Maximum fast-channel bit rate in kilobits per second
	(32− 2176).
	MINFBR: Minimum fast-channel bit rate in kilobits per second (32).
	MAXNMR: Maximum additional noise margin (16 dB).
	MINNMR: Minimum additional noise margin (0 dB).
	RAMODE: Rate adaptive mode. Valid values are:
	– AT_RUN: Automatically selected at run time (default).
	– PFBR: Planned fast channel bit rate in kilobits per second
	(32− 2176).
	TNMR: Target noise margin (3− 14 dB).
	If not specified, the values of these parameters remain unchanged.
errcde	Error code (see Appendix A, Error Codes)

4200-A2-GB20-00 August 2002 3-51