Paradyne 4200 1. ED-T1 Command Parameters 2 of, Response Format, ED-T1tidaidds1ctagds1nblkpst

4. DS1 Facility Commands

Table 4-1. ED-T1 Command Parameters (2 of 2)

ED-T1:[tid]:aid_ds1:[ctag]:::[ds1_nblk]:[pst];

[ds1_nblk]	For the following parameters if no value is specified, null is assumed.
(continued)	ATMACCPROF: ATM Access Profile index (1). This value determines
	the range of values for vpi and vci in several other commands. The
	value cannot be changed while any VPLs or VCLs exist.
	ATMACCPROFNM: ATM Access Profile name. The default is LT
	DEFVAL.
	QOSCLASS: Quality of service of connections on this port. The valid
	value is UBR (UBR connections only).
[pst]	Desired state. Valid values are:
	– IS: In service
	– OOS: Out of service. OOS-MA (out of service, management) is
	implied.
	If no value is specified, this parameter remains unchanged.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* ED-T1:[tid]:aid_ds1:[ctag]:::[ds1_nblk]:[pst] */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* ED-T1:[tid]:aid_ds1:[ctag]:::[ds1_nblk]:[pst] */ aid:ERRCDE=errcde

/* error description */

;

4200-A2-GB20-00 August 2002 4-3