Paradyne 4200 manual 10-4, 2. RTRV-ALM-ADSL Response Parameters 2 of, Example, Related Commands

10. Fault Commands

Table 10-2. RTRV-ALM-ADSL Response Parameters (2 of 2)

Parameter	Explanation
cond	ADSL Condition. Valid values are:
	FACTERM: Modem could not initialize (near-end only)
	LCD-F: Loss of Cell Delineation (fast) (near-end only)
	LOF: Loss of Frame
	LOL: Loss of Link (near-end only)
	LOS: Loss of Signal (near-end only)
	LPR: Loss of Power (far-end only)
	LORATE: Line rate is below planned rate (Loss of Signal Quality)
serveff	As described for command parameters (see Table 10-1,
	RTRV-ALM-ADSL Command Parameters), except that ALL is not used.
locn	As described for command parameters (see Table 10-1,
	RTRV-ALM-ADSL Command Parameters).
dirn	As described for command parameters (see Table 10-1,
	RTRV-ALM-ADSL Command Parameters).
cond_descr	Description of alarm condition

Example

Retrieve all major service-affecting ADSL alarms for rack 1, shelf 1, slot 1, circuit 4.

RTRV-ALM-ADSL:TAMPA:ADSL-1-1-1-4:42::MJ,,SA;

TAMPA 02-06-27 03:38:43

M42 COMPLD

/* RTRV-ALM-ADSL:TAMPA:ADSL-1-1-1-4:42:::: */ "ADSL-1-1-1-4,ADSL:MJ,LPR,SA,,,NEND,RCV,:Loss of Power"

;

Related Commands

None

10-4 August 2002 4200-A2-GB20-00