Paradyne 4200 manual 10-40, 24. RTRV-COND-T1 Response Parameters 2 of, Example, Related Commands

10. Fault Commands

Table 10-24. RTRV-COND-T1 Response Parameters (2 of 2)

Parameter	Explanation
ntfncde	Notification code. Valid values are:
	CR: Critical alarm
	MJ: Major alarm
	MN: Minor alarm
	NA: Not alarmed (reported via REPORT EVENT)
	NR: Not reported (information is stored in the NE)
cond_ds1	As described for command parameters (see Table 10-23,
	RTRV-COND-T1 Command Parameters), except ALL is not used.
[locn]	Location of the condition. Valid values are:
	NEND: Near End
	FEND: Far End
serveff	Service effect. Valid values are:
	SA: Service affecting
	NSA: Not service affecting
[dirn]	As described for command parameters (see Table 10-23,
	RTRV-COND-T1 Command Parameters), except ALL is not used.

Example

Retrieve current conditions for NTT1 facility.

RTRV-COND-T1:TAMPA:NTT1:42::,;

TAMPA 02-04-20 10:30:23

M42 COMPLD

/* RTRV-COND-T1:TAMPA:NTT1:42::, */ "NTT1-1,T1:CR,LOS,SA,,,NEND,,,Loss of Signal/Clock"

;

Related Commands

None

10-40 August 2002 4200-A2-GB20-00