Paradyne 4200 3. ENT-T1 Command Parameters 2 of, 4. T1 Line Equalization Values, EQLZ value, IP c

4. DS1 Facility Commands

Table 4-3. ENT-T1 Command Parameters (2 of 2)

ENT-T1:[tid]:aid_ds1:[ctag]:::ds1_nblk:[pst];

ds1_nblk	For the following parameters if no value is specified, null is assumed.
(continued)	ATMACCPROF: ATM Access Profile index (1). This value determines
	the range of values for vpi and vci in several other commands. The
	value cannot be changed while any VPLs or VCLs exist.
	ATMACCPROFNM: ATM Access Profile name. The default is NT
	DEFVAL.
	QOSCLASS: Quality of service of connections on this port. The valid
[pst]	Desired state. Valid values are:
	IS: In service (default)
	OOS: Out of service. OOS-MA (out of service, management) is implied.
	If no value is specified, this parameter is set to IS.

Table 4-4. T1 Line Equalization Values

EQLZ value	Cable length (feet)	Equalization (dB)
0 (default)	0− 133	0.6
200	134− 266	1.2
300	267− 399	1.8
500	400− 533	2.4
600	534− 655	3.0

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* ENT-T1:[tid]:aid_ds1:[ctag]:::ds1_nblk:[pst] */

;

4-6 August 2002 4200-A2-GB20-00