Paradyne 4200 manual 3-48, 38. RTRV-PROFILE-ADSLDNALM Response Parameters 1 of, Explanation

3. ADSL Facility Commands

Table 3-38. RTRV-PROFILE-ADSLDNALM Response Parameters (1 of 2)

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
adsl_profile_id	As described for command parameters (see Table 3-37,
	RTRV-PROFILE-ADSLDNALM Command Parameters), except that ALL
	is not used.
profile_scope	As described for command parameters (see Table 3-37,
	RTRV-PROFILE-ADSLDNALM Command Parameters).
profile_name	A string of up to 32 characters that uniquely identifies the profile within
	its scope.
[adslprof_nblk]	ADSL parameter block containing one or more of the following named
	parameters (separated by commas):
	LOFS-L: Loss Of Frame Seconds (line). SNMP trap and TL1
	autonomous message are sent if the number of LOFS events in a
	15-minute interval meets or exceeds the selected value (0− 900
	seconds, where 0 disables the messages). The default is 0.
	LPRS-L: Loss Of Power Seconds (line). SNMP trap and TL1
	autonomous message are sent if the number of LPRS events in a
	15-minute interval meets or exceeds the selected value (0− 900
	seconds, where 0 disables the messages). The default is 0.
	ES-L: Errored Seconds (line). SNMP trap and TL1 autonomous
	message are sent if the number of ES events in a 15-minute interval
	meets or exceeds the selected value (0− 900 seconds, where 0 disables
	the messages). The default is 0.
	SES-L: Severely Errored Seconds (line). SNMP trap and TL1
	autonomous message are sent if the number of SES events in a
	15-minute interval meets or exceeds the selected value (0− 900
	seconds, where 0 disables the messages). The default is 0.
	UAS-L: Unavailable Seconds (line). SNMP trap and TL1 autonomous
	message are sent if the number of UAS events in a 15-minute interval
	meets or exceeds the selected value (0− 900 seconds, where 0 disables
	the messages). The default is 0.
	INCRATE-F: Increasing Rate (fast channel). SNMP rate change trap
	and TL1 autonomous message are sent if the current rate is ≥ the
	previous rate plus this threshold (0-2176 kbps in 32 kbps increments,
	where 0 disables the messages). The default is 0.

3-48 August 2002 4200-A2-GB20-00