Paradyne 4200 5-14, sid yy-mm-dd hhmmss M c DENY RTRV-ATMPORTtidaidatmportctagpstfsstf, errcde

5. ATM Commands

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-ATMPORT:[tid]:aid_atmport:[ctag]::::[pstf][sstf]

*/

errcde

;

Table 5-12. RTRV-ATMPORT Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_atmport	As described for command parameters (see Table 5-11,
	RTRV-ATMPORT Command Parameters).
state	State from the Bellcore model. Values are:
	IS-NR. In service, normal.
	OOS-AU: Out of service, autonomous.
	OOS-MA: Out of service, management. Transient state (changes to
	OOS-AUMA).
	OOS-AUMA: Out of service, autonomous and management.
sstf	As described for command parameters (see Table 5-11,
	RTRV-ATMPORT Command Parameters).
atmport_nblk	SEGID: ATM segment location ID. A 16-octet field that identifies this
	ATM interface for OAM F5 loopbacks. When a segment F5 OAM
	loopback cell is received, the destination segment location in the cell is
	compared to the segment location ID for the card. If the destination
	location ID matches the location ID or is all ones, the cell is looped back
	to the source. If there is not a match, the cell passes through the card.
	he value is entered as 32 hexadecimal characters or ALLONES
	(default). Allowed values are restricted per ITU-T1.610 as follows:
	The first byte must be 01, 02, 03, FF or 6A.
	TIf the first octet is FF, then octets 2− 16 must also be FF.
	If the first octet is 6A, then octets 2− 16 must also be 6A.
	If no value is specified for this field, then this parameter remains the
	same.

5-14 August 2002 4200-A2-GB20-00