Paradyne 4200 Alw-Msg-All, 14-4, 3. ALW-MSG-ALL Command Format, ALW-MSG-ALLtidaidallctagntfcnde

14. System Commands

ALW-MSG-ALL

The ALW-MSG-ALL command allows all autonomous messages to be reported. This command affects only the issuing user’s session. Unreported alarms and events existing at the time of resumption are reported with the REPT-ALM and REPT-EVT commands.

Table 14-3. ALW-MSG-ALL Command Format

ALW-MSG-ALL:[tid]:[aid_all]:[ctag]::[ntfcnde];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	The identification of the target NE. TID is optional and has a factory
	default value of null. The NE's SID code is the only other valid value.
[aid_all]	Access Identifier for all entities. The value is ALL.
[ctag]	The correlation tag (6 characters maximum) that links an input
	command with associated output responses. It is optional with a default
	of 0.
[ntfcncde]	Notification code for some autonomous messages. Grouping is allowed.
	If no value is specified, ALL is assumed. Valid values are:
	CR = Critical alarm
	MJ = Major alarm
	MN = Minor alarm
	NA = Not alarmed

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* ALW-MSG-ALL:[tid]:[aidall]:[ctag]::[ntfcncde] */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* ALW-MSG-ALL:[tid]:[aidall]:[ctag]::[ntfcncde] */ errcde

;

14-4 August 2002 4200-A2-GB20-00