Paradyne 4200 manual Example, RTRV-PM-T1 Response Parameters Explanation

4. DS1 Facility Commands

Table 4-11. RTRV-PM-T1 Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
aid_ds1	As described for command parameters, except that DS3NT is not used
[aid_type]	Type of AID. The value is T1.
monds3	As described for command parameters, except that ALL is not used
monval	Measured value for the monitored parameter (0− 4294967295)
[locn]	As described for command parameters
[tmper]	As described for command parameters
[mondat]	As described for command parameters, except that ALL is not used
[montm]	As described for command parameters, except that ALL is not used
errcde	Error code (see Appendix A, Error Codes)

Example

Retrieve the near-end alarm indication signal count above 4096 for a 15-minute period beginning at 8:30 a.m. on January 10.

RTRV-PM-T1:TAMPA:DS1NTA:42::AIS,4096-UP,NEND,,15-MIN,01-10,0 8-30;

TAMPA 02-01-24 12:30:43 M 42 COMPLD

/* RTRV-PM-T1:TAMPA:DS1NTA:42::AIS,4096-UP,NEND,,15-MIN,01-10,0 8-30 */

"DS1NTA:AIS,2015,,NEND,,15-MIN,01-10,08-30"

;

Related Command

RTRV-ALM-T1on page 10-12

4-14 August 2002 4200-A2-GB20-00