Paradyne 4200 Dlt-Profile-Adslalm, 7. DLT-PROFILE-ADSLALM Command Parameters, Response Format

3. ADSL Facility Commands

DLT-PROFILE-ADSLALM

The DLT-PROFILE-ADSLALM command deletes selected ADSL alarm configuration profiles that are not in use.

Table 3-7. DLT-PROFILE-ADSLALM Command Parameters

DLT-PROFILE-ADSLALM:[tid]:adsl_profile_id:[ctag][:];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
adsl_profile_id	Numeric identifier of a profile (2− 30). Grouping and ranging are allowed.
	Profile 1 is a predefined profile and cannot be deleted.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* DLT-PROFILE-ADSLALM:[tid]:adsl_profile_id:[ctag][:] */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* DLT-PROFILE-ADSLALM:[tid]:adsl_profile_id:[ctag][:] */ aid:ERRCDE=errcde

/* error description */

;

3-8 August 2002 4200-A2-GB20-00