Paradyne 4200 3-34, 26. RTRV-ADSL Response Parameters 2 of, DLT-PROFILE-ADSL on page, Example

3. ADSL Facility Commands

Table 3-26. RTRV-ADSL Response Parameters (2 of 2)

Parameter	Explanation
adsl_nblk	MXTXPWRDN: Specifies the maximum transmission power settings for
(continued)	the ATU-C. The maximum transmit power range may be limited
	according to local guidelines when spectrum management is enabled.
	The values (configurable in 1 dB increments) supported are: +12 to
	− 14 dB (default is +12 dB)
	MXTXPWRUP: Specifies the maximum transmission power settings for
	the ATU-R. The maximum transmit power range may be limited
	according to local guidelines when spectrum management is enabled.
	The values (configurable in 1 dB increments) supported are +12 to
	− 14 dB (default is +12 dB)
state	State from the Bellcore state model. Values are:
	IS-NR: In service, normal
	OOS-AU: Out of service, autonomous
	OOS-MA: Out of service, management (transitory state, changes to
	OOS-AUMA)
	OOS-AUMA: Out of service, management and autonomous
[sst]	As described for command parameters (see Table 3-25,RTRV-ADSL
	Command Parameters).
errcde	Error code (see Appendix A, Error Codes)

Example

Retrieve ADSL configuration for data rack 1, shelf 1, slot 1, circuit 9.

RTRV-ADSL:TAMPA:ADSL-1-1-1-9:42::::;

TAMPA 02-03-24 12:30:43

M42 COMPLD

/* RTRV-ADSL:TAMPA:ADSL-1-1-1-9:42:::: */ "ADSL-1-1-1-9:ADSLPROF=4,QOSCLASSF=UBR,:IS"

;

Related Commands

DLT-PROFILE-ADSLon page 3-6

ED-ADSLon page 3-10

ED-PROFILE-ADSLDNon page 3-14

ED-PROFILE-ADSLUPon page 3-19

ENT-PROFILE-ADSLon page 3-24

RTRV-PROFILE-ADSLon page 3-40

RTRV-PROFILE-ADSLDNon page 3-44

RTRV-PROFILE-ADSLUPon page 3-50

3-34 August 2002 4200-A2-GB20-00