Paradyne 4200 manual Rept Evt Eqpt, 4. REPT EVT EQPT Message Parameters

7. Equipment Commands

REPT EVT EQPT

The REPT EVT EQPT message reports current equipment events from the NE.

Table 7-4. REPT EVT EQPT Message Parameters

almcde atag REPT EVT EQPTaid_eqpt:cond_eqpt,[condeff], [ocrdat],[ocrtm]:[conddescr];

almcde Alarm code. Identifies the severity of the alarm. Values are:

–*C: Critical alarm

–**: Major alarm

–*^: Minor alarm

–A^: Automatic message (typically reports a cleared alarm)

atag	Automatic tag. Indicates the numerical sequence of reported messages.
aid_eqpt	Access identifier for the equipment. Each AID format can be preceded
	with AID=, but this is not required. Enter in the following format,
	replacing lower-case parameters with the values given:
	– LT-rack-shelf-slot: LT unit
	– SHELF-rack-shelf: shelf
	– rack: Rack Number (1)
	– shelf: Shelf Number (1)
	– slot: LT Slot Number (1)
cond_eqpt	Equipment condition. Valid values are:
	– EQPT: Equipment failed self-test
	– FANALM-1: Fan alarm for fan 1
	– FANALM-2: Fan alarm for fan 2
	– PROGVER: Failed to load or find requested software or
	configuration file
	– RMTDLFAIL: Failed to download software or configuration
	– SWROLLBACK: Software version rolled back
[condeff]	Effect of the event on the condition reported. Valid values are:
	– SC: Standing condition raised
	– CL: Standing condition cleared
[ocrdat]	Date of alarm occurrence in the format mm-dd (month-day).
[ocrtm]	Time of alarm occurrence in the format hh-mm (hour-minute).
[conddescr]	Description of alarm condition (40 characters maximum).

4200-A2-GB20-00 August 2002 7-5