Paradyne 4200 4-11, 9. REPT-OPSTAT-T1 Response Parameters, Example, Related Commands, Explanation

4. DS1 Facility Commands

Table 4-9. REPT-OPSTAT-T1 Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_ds1	As described for command parameters (see Table 4-8,REPT-OPSTAT-
	T1 Command Parameters).
op_ds1	DS1 operational parameter. Values are:
	INCELLS: Rolling count of cells received on this facility.
	OUTCELLS: Rolling count of cells transmitted on this facility and
	discarded for any reason.
	INCELLSUKN: Rolling count of cells received on this facility and
	discarded during header validation with unrecognized VPI/VCI values.
	OCD: Rolling count of Out of Cell Delineation events on this facility.
	STATUSCD: Current status of cell delineation state. Values are:
	– Normal: No failure condition
	– LOCD: Loss Of Cell Delineation
value	Value of parameter specified by op_ds1.

Example

Report DS1 facility operational parameters for NTT1-3.

REPT-OPSTAT-T1:TAMPA:NTT1-1;

TAMPA 01-11-24 12:30:43

M42 COMPLD

/* REPT-OPSTAT-T1:TAMPA:NTT1-1:42 */

"NTT1-3:INCELLS,35500" "NTT1-3:OUTCELLS,23300"

;

Related Commands

None

4200-A2-GB20-00 August 2002 4-11