Paradyne 4200 manual Ed-Crs-Vc, 3. ED-CRS-VC Command Parameters, ED-CRS-VCtidntvcl,ltvclctagpst

6. Cross Connect Commands

ED-CRS-VC

The ED-CRS-VC command edits the configuration of a VC-level cross-connection between the NT and an LT.

Table 6-3. ED-CRS-VC Command Parameters

ED-CRS-VC:[tid]:nt_vcl,lt_vcl:[ctag]::::[pst];

RESTRICTIONS: The following restrictions apply to this command:

All parameters in this command are position-defined.

This command requires two AID parameter entries to uniquely identify an existing cross-connection.

The deletion of a cross-connection is conditional on its current operational state. All endpoints must be edited OOS-MA-AS or the command will fail.

TA partial (PRTL) response is generated if all cross-connections cannot be deleted.

The range of values for vpi and vci is determined by the number of VPI and VCI bits allocated.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
nt_vcl	Virtual Channel Identifier for the Virtual Channel Link on the NT
	(network) side. Grouping and ranging are allowed. Enter in the following
	format, replacing lower-case parameters with the values given:
	NTVCL-vpi-vci
	– vpi: Virtual Path Identifier
	– vci: Virtual Channel Identifier for the Virtual Channel Link
lt_vcl	Virtual Channel Identifier for the Virtual Channel Link on the LT (user)
	side. Grouping and ranging are allowed.
	Enter in the following format, replacing lower-case parameters with the
	values given:
	LTVCL-rack-shelf-slot-circuit-vpi-vci: LT circuit
	– rack: Rack number (1)
	– shelf: Shelf number (1)
	– slot: LT slot number (1)
	– circuit: ADSL circuit on the LT (1− 4)
	– vpi: Virtual Path Identifier (for LT vpi=0, for NT vpi=0− 15)
	– vci: Virtual Channel Identifier for the Virtual Channel Link (for LT
	vpi=32− 63, for NT vpi=32− 1023)
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
[pst]	Desired Primary State. Valid values are:
	IS: In-Service
	OOS: Out-Of-Service (OOS-MA is implied)
	If not specified, the value of this parameter remains unchanged.

6-4 August 2002 4200-A2-GB20-00