Paradyne 4200 manual Using the Command Line Interface, TL1 Command Language, Overview

Using the Command Line Interface

2

Overview

he Command Line Interface (CLI) is accessible via either a directly connected terminal session or a Telnet connection. You can use the CLI to:

Change the operational characteristics of the device by setting configuration values

TDisplay system status Perform diagnostics

he system supports multiple simultaneous CLI sessions.

TL1 Command Language

he GranDSLAM 4200 uses Transaction Language No. 1 (TL1) commands since it is a universal language and is familiar to many network users.

he TL1 command is in the following general format:

COMMAND_CODE:[STAGING PARAMETERS]::<DATA_PARAMETERS>;

where:

The colon (:) is the data block delimiter.

The semicolon (;) is the input command terminator.

TSquare brackets ([ ]) designate that the enclosed value is optional.

Angled brackets (< >) indicate that the enclosed words describe part of the command.

4200-A2-GB20-00 August 2002 2-1