Paradyne 4200 manual Rtrv-Pm-Adsl, 3-37, 29. RTRV-PM-ADSL Command Parameters 1 of

3. ADSL Facility Commands

RTRV-PM-ADSL

The RTRV-PM-ADSL command retrieves performance monitoring data for selected ADSL lines.

Table 3-29. RTRV-PM-ADSL Command Parameters (1 of 2)

RTRV-PM-ADSL:[tid]:aid_adsl:[ctag]::[monadsl],[monlev], [locn],,[tmper],[mondat],[montm];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
aid_adsl	Access identifier for an ADSL line. The value can be preceded with
	AID=, but this is not required. Grouping and ranging are allowed. Enter
	in the following format, replacing lower-case parameters with the values
	given:
	ADSL-rack-shelf-slot-circuit
	rack: Rack number (1)
	shelf: Shelf number (1)
	slot: LT slot number (1)
	circuit: ADSL circuit on the LT (1− 24)
	Grouping and ranging are allowed.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
[monadsl]	Monitored parameter. Valid values are:
	CV-F: Code violations (fast channel)
	DHECV-F: Discarded cells due to HEC violations (fast channel)
	ES-L: Errored Seconds (line)
	LOF-L: Loss Of Frame seconds (line)
	LOL-L: Loss Of Link seconds (line)
	LOS-L: Loss Of Signal seconds (line)
	LPR-L: Loss Of Power seconds (line)
	UAS-L: Unavailable Seconds (line)
	Grouping is allowed. If no value is specified, ALL is assumed.
[monlev]	Threshold level. Use the format lev-dirn. Valid values are:
	lev: Level (0− 32767)
	dirn: Direction (UP, DN)
	If no value is specified, 1-UP is assumed.
[tmper]	Time period. The valid value is 15-MIN (15 minutes).
[monrdat]	Start date for the monitoring period in the format mm-dd. Or enter ALL
	(all performance monitoring data is retrieved). The default is the current
	date.

4200-A2-GB20-00 August 2002 3-37