Paradyne 4200 Paradyne Time MIB pdnTime.mib, Paradyne mpeATMConf.mib, C-44, Object, Description

C. Traps and MIBs

Paradyne Time MIB (pdn_Time.mib)

The Paradyne Time MIB (pdn_Time.mib) controls the date and time on the unit.

Table C-23. Paradyne Time MIB Objects

Object	Description		Setting/Contents
devDateAndTime	Displays the unit’s date and time and		Read/write.
	allows the NMS to change them to the
	appropriate time zone.
devNTPServerIP	Allows an NMS to configure the NTP		Read/write.
	server and IP address.
devNTPMode	Allows an NMS to configure the NTP		Read/write. Valid Values are:
	mode.		Unicast: NTP polls a specific server. The
			NTP server must have been configured
			Tusing the NTPServerIP object.
			Broadcast: NTP broadcasts a request and
			any NTP server can respond.
Paradyne mpe_ATMConf.mib
	This MIB is used for configuration of ATM-specific objects that are not available
	through the standard MIB RFC 2515.
Table C-24. Paradyne mpe_ATMConf.mib
Object		Description		Setting/Contents
mpeAtmLoopbackLocationCode		Identifies this module for the purpose of		Read/write.
		OAM f5 loopback.
entPhysicalIndex		The physical index of the card in the		Not accessible.
		DSLAM.

C-44 August 2002 4200-A2-GB20-00