Paradyne 4200 manual Ent-Atmarpent, 7. ENT-ATMARPENT Command Parameters, Response Format, IP c

Models: 4200

1 382
Download 382 pages 39.36 Kb
Page 167
Image 167
ENT-ATMARPENT

8. IP Access Commands

ENT-ATMARPENT

The command ENT-ATMARPENT defines a new entry in the ATM Address

Resolution Protocol table in the NE.

Table 8-7. ENT-ATMARPENT Command Parameters

ENT-ATMARPENT:[tid]:aid_ipport:[ctag];;ip_addr,[vpi],[vci] [arpent_nblk];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]

Identification of the target NE. The default value is null. The NE SID

 

code is the only other valid value.

 

 

aid_ipport

Access identifier of the IP port to be deleted. The value can be

 

preceded with AID=, but this is not required. The valid values are:

 

ATM-1: First IP-over-ATM interface in the NT

 

ATM-2: Second IP-over-ATM interface in the NT

 

 

[ctag]

Correlation tag (6 characters maximum) that links an input command

 

with associated output responses. The default is 0.

 

 

ip_addr

The next-hop IP address associated with the port. Valid values are:

 

ddd.ddd.ddd.ddd (where ddd is 1255).

 

 

[vpi]

The ATM Virtual Path Identifier (015) associated with the virtual circuit

 

for the entry. If no value is specified, BOOTVPI is used on ATM-1.

 

Required for ATM-2. See SET-NE-ALLon page 14-31for more

 

information.

 

 

[vci]

The ATM Virtual Channel Identifier (321023) associated with the

 

virtual circuit for the entry. If no value is specified, BOOTVCI is used on

 

ATM-1. Required for ATM-2. See SET-NE-ALLon page 14-31for more

 

information.

 

 

[arpent_nblk]

The named parameter block for the ARP table. The block consists of

 

the following parameter followed by an equal sign (=) and a valid value:

 

BITRATE: Bandwidth associated with the ATM VC for the entry. The

 

valid value is 0 (UBR).

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD /*

ENT-ATMARPENT:[tid]:aid_ipport:[ctag]::ip_addr,[vpi][vci] */

;

4200-A2-GB20-00

August 2002

8-9

Page 167
Image 167
Paradyne 4200 Ent-Atmarpent, 7. ENT-ATMARPENT Command Parameters, ENT-ATMARPENTtidaidipportctagipaddr,vpi,vci arpentnblk