Paradyne 4200 Ent-User-Secu, 12-10, 9. ENT-USER-SECU Command Parameters, Response Format, IP c

12. Security Commands

ENT-USER-SECU

The ENT-USER-SECU command defines the security levels and other security-related parameters for a specified user. One default user will be supported (UID=SUPERUSER, PID=ASN#1500, UAP=SUPER).

Table 12-9. ENT-USER-SECU Command Parameters

ENT-USER-SECU:[tid]:uid:[ctag]::pid,,[uap][:];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
uid	User Identification name (10 characters maximum). Input is
	case-sensitive.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
pid	Password (8− 10 characters). The value must include at least one digit,
	one letter, and one non-alphanumeric character. Input is case-sensitive.
[uap]	User Access Privilege. Valid values are:
	NULL: User has no access rights.
	RTRV: Retrieve. Report and retrieve commands only (no configuring).
	PROV: Configuring (provisioning). Report, retrieve, and configuration
	commands allowed. No system administrator tasks including
	management of the NE.
	SUPER: Supervisor. All user functions allowed.
uid_nblk	Named parameter block for UID.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* ENT-USER-SECU:[tid]:uid:[ctag]::pid,,[uap][:]*/

;

12-10 August 2002 4200-A2-GB20-00