Paradyne 4200 manual 9-11, 8. REPT-OPSTAT-VCL Response Parameters, Explanation

9. Performance Commands

Table 9-8. REPT-OPSTAT-VCL Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_vcl	As described for command parameters (see Table 9-7,
	REPT-OPSTAT-VCL Command Parameters).
[op_vcl]	VCL operational parameters. Values are:
	INCELLS: Rolling count of cells received on this VCL
	OUTCELLS: Rolling count of cells transmitted on this VCL
	LPBKINCELLS: A count of test cells received since the test started (up
	to 232-1)
	LPBKOUTCELLS: A count of test cells received since the test started
	(up to 232-1)
	LPBKRTDELAY: Average round trip delay in milliseconds since the test
	has started. Only calculated on cells received; dropped cells are not
	counted.
	LPBKMNRTDELAY: Shortest round trip delay in milliseconds since the
	test has started. Only calculated on cells received; dropped cells are not
	counted.
	LPBKMXRTDELAY: Longest round trip delay in milliseconds since the
	test has started. Only calculated on cells received; dropped cells are not
	counted.
	LPBKTYPE: The type of OAM loopback test, if any, most recently
	performed on the VCL:
	– E2E: End-to-End OAM cell
	– SEG: Segment OAM cell
	– NOTST: No test has been performed on the VCL
	LPBKSEGID: The ATM segment location identifier for the segment
	loopback or blank.
value	Value of parameter specified by op_vcl

4200-A2-GB20-00 August 2002 9-11