Paradyne 4200 manual Rept ALM Eqpt Message Parameters

7. Equipment Commands

REPT ALM EQPT

The REPT ALM EQPT message reports current alarms from the NE.

Table 7-3. REPT ALM EQPT Message Parameters

almcde atag REPT ALM EQPT aid_eqpts:ntfcde,cond_eqpt, srveff,[ocrdat],[ocrtm]: [conddescr];

almcde Alarm code. Identifies the severity of the alarm. Values are:

–*C: Critical alarm

–**: Major alarm

–*^: Minor alarm

–A^: Automatic message (typically reports a cleared alarm)

atag	Automatic tag. Indicates the numerical sequence of reported messages.
aid_eqpts	Access identifier for the equipment. Each AID format can be preceded
	with AID=, but this is not required. Enter in the following format,
	replacing lower-case parameters with the values given:
	– LT-rack-shelf-slot: LT unit
	– SHELF-rack-shelf: shelf
	– rack: Rack Number (1)
	– shelf: Shelf Number (1)
	– slot: LT Slot Number (1)
[ntfncde]	Notification code. Valid values are:
	–	CR: Critical alarm
	–	MJ: Major alarm
	–	MN: Minor alarm
	–	CL: Cleared alarm
cond_eqpt	Equipment condition. Valid values are:
	– EQPT: Equipment failed self-test
	– FANALM-1: Fan alarm for fan 1
	– FANALM-2: Fan alarm for fan 2
	– PROGVER: Failed to load or find requested software
	– RMTDLFAIL: Failed to download software
	– SWROLLBACK: Software version rolled back
[serveff]	Service effect. Valid values are:
	–	SA: Service affecting
	– NSA: Not service affecting
[ocrdat]	Date of alarm occurrence in the format mm-dd (month-day).
[ocrtm]	Time of alarm occurrence in the format hh-mm (hour-minute).
[conddescr]	Description of alarm condition (40 characters maximum).

7-4 August 2002 4200-A2-GB20-00