Paradyne 4200 15-14, 12. STP-LAMPTST Response Parameters, Example, Related Command, Explanation

15. Test Commands

Table 15-12. STP-LAMPTST Response Parameters

Parameter	Explanation
sid	Source NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_eqpt	Equipment access identifier. The value can be preceded with AID=, but
	this is not required. Grouping and ranging are allowed. Enter in the
	following format, replacing lower-case parameters with the values
	given:
	COM: Common equipment system identifier.
	Grouping and ranging are not allowed.

Example

Stop a lamp test on the TAMPA device.

STP-LAMPTST:TAMPA:COM;

TAMPA 01-11-24 12:30:43

M40 COMPLD

/* STP-LAMPTST:TAMPA:COM */

;

Related Command

STA-LAMPTSTon page 15-11

15-14 August 2002 4200-A2-GB20-00