Paradyne 4200 manual RTRV-PM-T1 Command Parameters 1

4. DS1 Facility Commands

RTRV-PM-T1

The RTRV-PM-T1 command retrieves DS1 performance monitoring data.

Table 4-10. RTRV-PM-T1 Command Parameters (1 of 2)

RTRV-PM-T1:[tid]:aid_ds1:[ctag]::[monds1],[monlev],[locn],, [tmper],[mondat],[montm];

Restrictions: All parameters in this command are position-defined.

[tid]	The identification of the target NE. TID is optional and has a default
	value of null. The NE's SID code is the only other valid value.
aid_ds1	Access identifier for the environment. Enter in the following format,
	replacing lower-case parameters with the values given:
	NTT1-circuit
	– circuit: DS1 circuit on the NT (1)
[ctag]	The correlation tag that correlates an input command with its associated
	output response(s). It is assigned by the originator of the command. The
	value is limited to six characters, which may be an identifier or a decimal
	numeral. It is optional with a default of 0.
[monds1]	Monitored parameter. Valid values are:
	CV-L: Line code violations
	ES-L: Line errored seconds
	CV-P: Path coding violations
	ES-P: Path errored seconds
	ESB-P: Path errored seconds, type B (bursty errored seconds)
	SES-P: Path severely errored seconds
	UAS-P: Path unavailable seconds
	SEFS-P: Path severely errored framing seconds
	DHECV: Discarded cells due to HEC violation
	Grouping is allowed. If no value is specified, ALL is assumed.
[monlev]	Threshold level. Valid values are:
	lev-dirn
	– lev: level (0− 4294967295)
	– dirn: direction. Values are UP and DN.
	If no value is specified, 1-UP is assumed.
[locn]	Location of the facility. Valid values are:
	NEND: Near end
	FEND: Far end (not supported on G.703 interfaces)
	If no value is specified, this parameter is not used for filtering
	responses.
[tmper]	Time period. The only valid value is 15-MIN (15 minutes).

4-12 August 2002 4200-A2-GB20-00