Paradyne 4200 Rtrv-Log, 11-4, 3. RTRV-LOG Command Parameters, RTRV-LOGtidlogidctaglognm, IP c

11. Log Commands

RTRV-LOG

The RTRV-LOG command retrieves selected logs.

Table 11-3. RTRV-LOG Command Parameters

RTRV-LOG:[tid]:[log_id]:[ctag]::lognm;

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	The identification of the target NE. TID is optional and has a default
	value of null. The NE's SID code is the only other valid value.
log_id	COM is the only allowed value other than NULL.
[ctag]	The correlation tag that correlates an input command with its associated
	output response(s). It is assigned by the originator of the command. The
	value is limited to six characters, which may be an identifier or a decimal
	numeral. It is optional with a default of 0.
lognm	Names of logs to be retrieved. ALL is not supported. Valid values are:
	UNKCELL− [aid_atmport]: Unknown cell log for the ATM interface.
	SYSTEM: System log containing records of all significant system events
	(alarms, events, database chages, ftp file transfer status, and security
	messages).
	SECURITY: Security messages (from the system log).

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss M c COMPLD

/* RTRV-LOG:[tid]:[aid_log]:[ctag]:lognm */ /* logdump */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-LOG:[tid]:[aid_log]:[ctag]:lognm */ errcde

;

11-4 August 2002 4200-A2-GB20-00