Paradyne 4200 manual Act-User, 14-2, ACT-USER Command Parameters

14. System Commands

ACT-USER

The ACT-USER command logs a user on and begins a user session.

Table 14-1. ACT-USER Command Parameters

ACT-USER:[tid]:[uid]:[ctag];;pid;

RESTRICTIONS: All parameters in this command are position-defined. A maximum of four remote (telnet) sessions and one console terminal session may be logged on simultaneously.

[tid]	The identification of the target NE. TID is optional and has a factory
	default value of null. The NE's SID code is the only other valid value.
[uid]	The user identification name (10 characters maximum). Input is
	case-sensitive. Grouping is not allowed.
[ctag]	The correlation tag (6 characters maximum) that links an input
	command with associated output responses. It is optional with a default
	of 0.
[pid]	The user identification name (10 characters maximum). Must include at
	least one letter, one digit, and one nonalphanumeric character. Input is
	case-sensitive. Grouping is not allowed.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* ACT-USER:[tid]:uid:[ctag]::pid */

;

NOTE:

In this response, the pid is displayed as a series of asterisks.

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

;

14-2 August 2002 4200-A2-GB20-00