Paradyne 4200 10-13, RTRV-ALM-T1tidaidds1ctagntfncde,, srveff,locn,dirn, Response Format, IP c

10. Fault Commands

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss M c COMPLD

/* RTRV-ALM-T1:[tid]:aid_ds1:[ctag]::[ntfncde],, [srveff],[locn],[dirn] */

"aid_ds1,[aid_type]:ntfncde,cond_ds1,serveff,,, locn,dirn:cond_descr"

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-ALM-T1:[tid]:aid_ds1:[ctag]::[ntfncde],,[srveff], [locn],[dirn] */

errcde

/* error description */

;

Table 10-8. RTRV-ALM-T1 Response Parameters (1 of 2)

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_ds1	As described for command parameters (see Table 10-7,RTRV-ALM-T1
	Command Parameters), except that ALL is not used.
aid_type	The type of Access Identifier. The value is T1.
ntfncde	As described for command parameters, except that ALL is not used.

4200-A2-GB20-00 August 2002 10-13