Paradyne 4200 Rtrv-Ne-All, 14-25, 21. RTRV-NE-ALL Command Parameters, RTRV-NE-ALLtidaidcomctag

14. System Commands

RTRV-NE-ALL

The RTRV-NE-ALL command retrieves common configuration data associated with the NE.

Table 14-21. RTRV-NE-ALL Command Parameters

RTRV-NE-ALL:[tid]:[aid_com]:[ctag][:];

RESTRICTION: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
[aid_com]	Access Identifier for all common equipment. The value can be preceded
	with AID=, but this is not required. The value is COM.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* RTRV-NE-ALL:[tid]:[aid_com]:[ctag][:] */

aid_com::ne_nblk

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-NE-ALL:[tid]:[aid_com]:[ctag][:] */ aid:ERRCDE=errcde

/* error description */

;

4200-A2-GB20-00 August 2002 14-25