Paradyne 4200 3-55, 42. RTRV-PROFILE-ADSLUPALM Response Parameters 2 of, Example, Related Command

3. ADSL Facility Commands

Table 3-42. RTRV-PROFILE-ADSLUPALM Response Parameters (2 of 2)

Parameter	Explanation
[adslprof_nblk]	DECRATE-F: Decreasing Rate (fast channel). SNMP rate change trap
(continued)	and TL1 autonomous message are sent if the current rate is ≤ the
	previous rate minus this threshold (0-2176 kbps in 32 kbps increments,
	where 0 disables the messages). The default is 0.
	INITFAIL: Initialization Failure. Enables or disables InitFailureTrap
	messages specified in RFC 2662.
	– Y: Enable Initialization Failure Trap messages only.
	– N: Disable Initialization Failure Trap messages only (Default).
	If not specified, the values of these parameters remain unchanged.
errcde	Error code (see Appendix A, Error Codes)

Example

Retrieve profile 6.

RTRV-PROFILE-ADSLUPALM:TAMPA:6:42;

TAMPA 02-07-24 12:30:43

M42 COMPLD

/* RTRV-PROFILE-ADSLUPALM:TAMPA:6 */

6:LOCAL:TAMPA101:LOFS-L=0,LOSS=0,LOLS=0,ES-L=120,SES-L=15, UAS-L=0,INCRATE-F=0,DECRATE-F=0,INIT=N

;

Related Command

ED-PROFILE-ADSLUPALMon page 3-21

ENT-PROFILE-ADSLALMon page 3-26

4200-A2-GB20-00 August 2002 3-55