Paradyne 4200 Rtrv-User-Secu, 12-14, 13. RTRV-USER-SECU Command Parameters, Response Format, IP c

12. Security Commands

RTRV-USER-SECU

The RTRV-USER-SECU command retrieves the security levels for a specified user. The user’s password cannot be retrieved.

Table 12-13. RTRV-USER-SECU Command Parameters

RTRV-USER-SECU:[tid]:uid:[ctag][:];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
uid	User Identification name (10 characters maximum). Input is
	case-sensitive. ALL is supported.
[ctag]	Correlation tag (6 characters) maximum that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* RTRV-USER-SECU:[tid]:uid:[ctag][:] */

"uid:uap:uid_nblk"

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-USER-SECU:[tid]:uid:[ctag][:] */ aid:ERRCDE=errcde

/* error description */

;

12-14 August 2002 4200-A2-GB20-00