LevelOne WAP-0005 user manual Command Reference, CLI Port Settings

Wireless Access Point User Guide

Figure 65: CLI Port Settings

4.Use the “Connect” command to start the connection.

5.You will be prompted for a user name and password.

Enter the current user name and password for the AP you are connecting to.

6.You will then see the prompt, and can then use any of the commands listed in the follow- ing Command Reference.

Command Reference

The following commands are available.

?-- Display CLI Command List admin-- Temporary factory admin boot flash -- Boot from flash

boot ethernet		-- Boot from network
cp -- Copy file
config wlan-- config wlanX
connect bss-- connect to bssX
del acl	-- Delete Access Control List
del key	-- Delete Encryption key
find bss	-- Find BSS
find channel		-- Find Available Channel
find all	-- Find All BSS
format	-- Format flash filesytem
bootrom	-- Update boot rom image

84