Wireless Access Point User Guide
Parameters
Disassociated Timeout | This determines how quickly a Wireless Station will be consid- |
| ered "Disassociated" with this AP, when no traffic is received. |
| Enter the desired time period. |
|
|
Fragmentation | Enter the preferred setting between 256 and 2346. |
|
|
Beacon Interval | Enter the preferred setting between 0 and 3000. |
|
|
RTS/CTS Threshold | Enter the preferred setting between 256 and 2346. |
|
|
Preamble Type | Select the desired preamble type. |
|
|
Output Power Level | Select the desired power output. Higher levels will give a |
| greater range, but are also more likely to cause interference with |
| other devices. |
|
|
Antenna Selection | If your Access Point has only 1 antenna, there is only 1 option |
| available. If your Access Point has 2 antennae, select the option |
| which gives the best results in your location. |
|
|
802.11b (2.4GHz only) |
|
Protection Type | Select the desired option. |
|
|
Short Slot Time | Enable or disable this setting as required. |
|
|
Protection Mode | Normally, this should be left at "Auto". |
|
|
Protection Rate | Select the desired option. |
|
|
34
