LevelOne WAP-0005 user manual Set Extended Channel Mode

				Appendix E – Command Line Interface
set dhcpMode		-- Set Dhcp Mode
set domainsuffix -- Set Domain Name Server Suffix
set dtim	-- Set Data Beacon Rate (DTIM)
set enableANI		-- Turn Adaptive Noise Immunity Control On/Off
set encryption		-- Set Encryption Mode
set extendedchanmode				-- Set Extended Channel Mode
set factorydefault			-- Restore to Default Factory Settings
set firStepLvl		-- Set ANI Parameter for FirStepLevel
set fragmentthreshold				-- Set Fragment Threshold
set frequency		-- Set Radio Frequency (MHz)
set gateway-- Set Gateway IP Address
set gbeaconrate		-- Set 11g Beacon Rate
set groupkeyupdate				-- Set Group Key Update Interval (in Seconds)
set gdraft5-- Set 11g Draft 5.0 compatibility
set hostipaddr		-- Set Host IP address
set ipaddr -- Set IP Address
set ipmask -- Set IP Subnet Mask
set key	-- Set Encryption Key
set keyentrymethod				-- Select Encryption Key Entry Method
set keysource		-- Select Source Of Encryption Keys
set login -- Modify Login User Name
set minimumrate -- Set Minimum Rate
set macAuth-- Set Mac Authentication Enable/Disable
set nameaddress			-- Set Name Server IP address
set noiseImmunityLvl				-- Set ANI Parameter for Noise Immunity Level

set ofdmTrigHigh -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control set ofdmTrigLow -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control

set ofdmWeakSigDet		-- Set ANI Parameter for OFDM Weak Signal Detection
set overRidetxpower		-- Set Tx power override
set operationMode-- Set operation Mode
set password	-- Modify Password
set passphrase	-- Modify Passphrase
set pktLogEnable -- Enable Packet Logging
set power -- Set Transmit Power
set quietAckCtsAllow		-- Allow Ack/Cts frames during quiet period
set quietDuration-- Duration of quiet period
set quietOffset	-- Offset of quiet period into the beacon period

89