Selecting preset sound modes EQ, English, Rhythm and Blues

ENGLISH

Selecting preset sound modes (EQ)

You can select a preset sound mode suitable to the music genre.

Each time you press the button, the sound mode (EQ) is activated or deactivated.

•When the sound mode (EQ) is activated, the last selected sound mode is recalled and applied to the current source.

Ex.: When you have selected “FLAT” previously.

As you turn the control dial, the sound modes change as follows:

Notes:

•You can adjust each sound mode to your preference, and store it in memory.

If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 35.

•To turn on or off the extended bass, see page 33.

To store a sound mode separately for each playback source (EQ Link)

Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source.

A sound mode can be stored for each of the following sources—FM1, FM2, FM3, AM (MW/LW), CD and external components.

•See also “Changing the general settings (PSM)” on page 36.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “EQ LINK” (Equalization Link).

3 Turn the control dial clockwise to select “ON.”

4 Press SEL (select) to finish the setting.

To cancel EQ Link, repeat the same procedure and select “OFF” by turning the control dial counterclockwise in step 3.

	•	When “EQ LINK” is set to “ON”
FLAT OHard Rock OR & B*OPOP O		The selected sound mode can be stored in
JAZZ ODance Music OCountry O Reggae O		memory for the current source.
Classic OUSER 1 OUSER 2 OUSER 3 O		Each time you change to the same source, the
(back to the beginning)		same sound mode is also recalled, and shown
		on the display.
*Rhythm and Blues		on the display.
*Rhythm and Blues	•	When “EQ LINK” is set to “OFF”
		The selected sound mode effect applies to all
EQ level changes as you select the sound mode.		the sources selected.

Ex.: When you select “POP”

To cancel the sound mode, select “FLAT” in

step 2.