JVC KD-SH909R, KD-SH707R manual Troubleshooting, English

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

	Symptoms	Causes	Remedies
• Sound is sometimes		Contents on the disc are not	Change the disc.
	interrupted.	compatible with the unit.
		You are driving on rough	Stop playback while driving on
		roads.	rough roads.
		Disc is scratched.	Change the disc.
• Sound cannot be heard		Connections are incorrect.	Check the cords and
	from the speakers.		connections.
		The volume level is set to the	Adjust it to the optimum level.
		minimum level.
		The “P.AMP SW” setting is	Set it to “ON.”
		set to “OFF.”	(See page 38.)

•CD-R/CD-RW cannot be CD-R/CD-RW is not finalized. Insert a finalized CD-R/CD-RW

Playback	played back.		or finalize the CD-R/CD-RW
	• Tracks on the CD-R/CD-RW		with the component used for
	cannot be skipped.		recording.
General
	• “NO DISC” or “EJECT	The unit may function	While pressing	, press and
	ERR” appears on the	incorrectly.	hold 0for more than 2 seconds.
	display and disc cannot be		(Be careful not to drop the disc
	ejected.		when ejecting.)

•No message appears on the display but disc cannot be ejected.

	• When “ERR 00” to “ERR		Something is blocking the	Press the reset button on the
		44” appears on the display.	control panel movement.	front panel. (See page 2.)
				If the reset button does not
				work, check the Installation/
				Connection Manual (separate
				volume).
				(Ex.: You have used screws
				which are longer than
				specified.)
	•	This unit or CD changer	The built-in microcomputer	Press the reset button on the
		does not work at all.	may function incorrectly due	control panel. (See page 2.)
			to noise, etc.
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
FM/AM		Sequential Memory)
		automatic preset does not
		work.
	•	Static noise while listening	The antenna is not connected	Connect the antenna firmly.
		to the radio.	firmly.

54