ENGLISH
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)
•Manual preset of both FM and AM (MW/LW) stations
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons
—No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically tuned in.
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
1 Select the FM band (FM1 – 3) you want to store FM stations into.
1 Press SOURCE 
repeatedly to select FM.
2 If necessary, press B (band) repeatedly to select the FM band. Each time you press the button, the FM band changes as follows:
| F 1 |
| F 2 |
| F 3 |
|
|
|
|
| |||
| (FM 1) |
| (FM 2) |
| (FM 3) | |
|
|
|
|
|
|
|
2 Press and hold both buttons for more than 2 seconds.
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM (MW/LW)) manually.
Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band.
1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
1 Press SOURCE 
repeatedly to select FM as the source.
2 If necessary, press B (band) repeatedly to select FM1. Each time you press the button, the FM band changes as follows:
| F 1 |
| F 2 |
| F 3 |
|
|
|
|
| |||
| (FM 1) |
| (FM 2) |
| (FM 3) | |
|
|
|
|
|
|
|
“SSM” appears, then disappears when automatic preset is over.
12
