To adjust the display contrast level

To turn the line input switch on or off

– CONTRAST

– LINE IN

You can adjust the display contrast level among 01 (dark) to 10 (bright). When shipped from the factory, the display contrast level is set at level 05.

To select the scroll mode – SCROLL

You can select the scroll mode for the disc information (when the entire text cannot be shown all at once).

When shipped from the factory, Auto Scroll mode is set to “ONCE.”

ONCE: Scrolls only once.

AUTO: Repeats the scroll (5-second intervals in between).

• OFF:

Cancels Auto Scroll.

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing D (display) for more than 1 second.

To select the subwoofer cutoff frequency

– CUT OFF F

When a subwoofer is connected to this unit, select an appropriate cutoff frequency level for your subwoofer.

When shipped from the factory, the subwoofer cutoff frequency is set to “MID(80Hz).”

• LOW(50Hz): Frequencies higher than 50 Hz are cut off to the subwoofer.

• MID(80Hz): Frequencies higher than 80 Hz are cut off to the subwoofer.

HIGH(115Hz): Frequencies higher than 115 Hz are cut off to the subwoofer.

You can switch the line input off when no external component is connected to the LINE IN plugs. When shipped from the factory, the line input switch is set to “ON.”

ON:

You can select “LINE INPUT (LINE)”

 

 

as the playback source.

OFF:

You cannot select “LINE INPUT

 

 

(LINE)” as the playback source.

To turn the auxiliary input switch on or off

– AUX IN

You can switch the auxiliary input off when no external component is connected to the auxiliary input jack.

When shipped from the factory, the auxiliary input switch is set to “ON.”

ON:

You can select “AUX INPUT (AUX)”

 

 

as the playback source.

OFF:

You cannot select “AUX INPUT(AUX)”

 

 

as the playback source.

ENGLISH

39

Page 39
Image 39
JVC KD-SH707R manual To adjust the display contrast level, To select the scroll mode Scroll, Contrast Line, Cut Off F, Aux