ENGLISH

2 Select the DAB band (DAB1, DAB2, or DAB3).

Each time you press the button, the DAB band

changes as follows:

 

D1

 

D2

 

D3

 

 

 

 

 

 

(DAB 1)

(DAB 2)

 

(DAB 3)

 

 

 

 

 

 

 

Note:

This receiver has three DAB bands (DAB 1, DAB 2, DAB 3). You can use any of them to tune in to an ensemble.

3 Start searching an ensemble.

Press ¢ to search ensembles of higher frequencies.

Press 4 to search ensembles of lower frequencies.

When an ensemble is received, searching stops.

To stop searching before an ensemble is

received, press the same button you have pressed for searching.

4 Select a service you want to listen to.

1 Press M (mode).

Within

5 Seconds

2 Press ¢ or

4 to select a service you want.

To change the display information while tuning in to an ensemble

Normally service name is shown on the display. If you want to change the display information, press D (display).

Each time you press the button, the following information appears on the display for a while.

Service name

&

Ensemble name

Frequency

&

Channel number

Then, the display goes back to the original indication in several seconds.

To tune in to a particular ensemble without searching

1 Press SOURCE to select DAB tuner as the source.

2 Press B (band) repeatedly to select the DAB band (DAB 1, DAB 2 or DAB 3).

3 Press and hold ¢ or 4 for more than 1 second. “MANU” or “MANUAL*” flashes on the display.

4 Press ¢ or 4 repeatedly until the ensemble you want is reached.

If you hold down the button, the ensembles keep changing until you release the button.

*When the source symbol animation display is not selected.

50

Page 50
Image 50
JVC KD-SH909R, KD-SH707R To tune in to a particular ensemble without searching, Select the DAB band DAB1, DAB2, or DAB3